仪器readout: Bargraph display conveys data at a glance
The LPB provides local readout from a 4-20 mA signal and can trigger user-set alarms. |
In some situations, an analog display that indicates a percentage of a total value is more useful than a numerical representation of the same value. When you want just such an analog display, the LPB (loop powered bargraph) fromOtekprovides a 51 segment display with single or multicolors.
The circular arrangement of the display segments provides a familiar appearance for users that makes information easy to see and compare visually, particularly when used in groups. With 51 segments, each represents 2% of the total value for precise value indications even without digits. The LPB is loop powered and only puts a 4.5 V burden on the circuit, allowing multiple displays on one loop if required. Values can be scaled within 30% of the factory setting using pots mounted on the front panel.
Four grades are available, including industrial, Mil-spec, nuclear, and intrinsically safe. All carry a lifetime warranty.
—Edited byPeter Welander流程工业的编辑
Control Engineering仪器ation & Sensors eNewsletter
( Register here and scroll down to select your choice of eNewsletters free.)
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Clickhereto start this process.