Sensors Expo 2006: Signal conditioner IC with on-chip diagnostics

ZMD AG introduced the ZMD31015 signal conditioner integrated circuit with on-chip diagnostics at Sensors Expo 2006 held earlier this month in the Chicago area.

ZMD31015 signal conditioner IC with on-chip diagnostics from ZMD AG can be used with nearly all piezo-resistive bridge sensors. CMOS semiconductor device is the newest member of ZMD’s family of resistive bridge (RBic-Lite) signal conditioner integrated circuits. The device was introduced at the recent Sensors Expo held in Rosemont (Chicago), IL, earlier this month.

ZMD31015提供精确的放大和感官r-specific correction of bridge sensor signals. Enhanced real-time diagnostics detect any faulty connections, shorts, and power loss events. Signal conditioning is accomplished using an internal digital signal processor running a correction algorithm based on calibration coefficients stored in an on-chip, non-volatile EEPROM.

Measured and corrected bridge values are provided at the signal pin, which can be configured as an analog voltage output or one-wire serial digital output. The digital one-wire output can also be used for a PC-controlled procedure to program calibration coefficients into the on-chip EEPROM.

Internal diagnostics make the device well suited for automation and industrial applications. A supporting development kit, including development board, SOP8 samples, software, and supporting documentation, is available on the company’s Website.

—Jeanine Katzel, senior editor, Control Engineering

Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Clickhereto start this process.