AMCI

SD17040C stepper motor driver

AMCI's SD17040C was designed with the customer in mind. Onboard dip switches simplify set-up and installation, eliminating the need for proprietary software and programming cables. Plus, field changes are a snap, making it easy to reconfigure output current in 0.1A increments or microstepping resolution.

SMD23K EtherCAT Integrated Stepper

AMCI's SMD23K Integrated Stepper is a size 23 3-in-1 Integrated Stepper Motor, Drive, and Controller package with an EtherCat network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD23K incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the EtherCAT network.

SD31045 stepper motor driver

The SD31045 4.5 Amp stepper motor driver is the latest addition to AMCI's family of stepper motor drivers. Identified through a compact design small footprint, this powerful stepper motor driver is a leader in the 4.5 Amp current range. Incorporating a 310 Vdc motor supply bus, the SD31045 provides stepper motors with plenty of power.

SD7540A Stepper Motor Driver

The AMCI SD7540A is a powerful stepper motor driver in a low cost, compact package. Externally powered from a 24 – 75VDC power supply, this drive pack can operate up to NEMA size 34 motors. With up to 4 Arms(5.6 A peak) of half step and microstepping capabilities, this drive pack provides higher speed and torque than any other drive in its class.

SMD24K Ethercat integrated stepper

AMCI's SMD24K Integrated Stepper is a size 24 3-inch-1 integrated stepper motor, drive and controller package with an EtherCat network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD24K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. Programming and configuration is streamlined because it uses standard commands through your PLC's software that are communicated over the network.

SMD17K EtherCAT integrated stepper

AMCI's SMD17K Integrated Stepper is a size 17, 3-in-1 integrated stepper motor, drive and controller package with an EtherCAT network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD17K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.

SMD34K EtherCAT integrated stepper

AMCI's SMD34K Integrated Stepper is a size 34 3-in-1 integrated stepper, motor, drive and controller package with an EtherCat network interface. It is a self-contained motion control product. AMCI's SMD34K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. We've reduced total system costs and simplified installation spyou only have to purchase one product versus a separate controller, drive and motor.

SD17060B stepper motor driver

The SD17060B is a compact and powerful 6.3 arms stepper motor driver that has several updates over its previous iteration (SD17060). A narrower, more compact design retains the standard mounting pattern, but saves valuable panel space. Additionally, improvements to the drive yield a streamlined enclosure, eliminating the finned heat sink and permitting optional panel or side mounting for increased thermal transfer. Set-up and configuration have been simplified via onboard LED diagnostics that communicate specific fault conditions.

SMD24E2 Ethernet Integrated Stepper

AMCI's SMD24E2 Networked Series is a size 24 3-in-1 Integrated Stepper Motor, Drive, and Controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD24E2 Network Series incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP, and Profinet).

SMD23E2 Ethernet integrated stepper

AMCI's SMD23E2 Networked Series is a size 23.3 inch integrated stepper motor, drive and controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD23E2 Network Series incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP and Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive and motor.

NEXUS PRESSPro 2 stamping press system

AMCI makes it easy and affordable to upgrade your PLC-based stamping press system with sophisticated controls that are usually associated with large, expensive machinery. The original NX3A1E1-M is now available in the E2 series with a new two port network module and a new part number NX3A1E2-M. The NEXUS PRESSPro II incorporates hard to find stamping press automation functions, normally purchased individually, into a single product that saves time and money.

NX2A4E2 NEXUS resolver interface

The concept of a resolver interface is nothing new to the industrial marketplace. However, AMCI's NEXUS NX2A4E2 can seem new because it's arguably the most versatile resolver interface available today. Engineered to provide absolute position and velocity data directly to the network, the four resolver channels can be configured three different ways: (4) single resolver inputs, (2) dual resolver multiturn inputs and (2) single resolver inputs + (1) dual resolver multiturn input. With 13-bit resolution for single resolver applications and 20-bit resolution for dual resolver applications, the NX2A4E2 can be used in applications ranging from metal stamping to high speed assembly and to overhead cranes. Whether your application calls for a single-turn resolver, multi-turn resolver, or some combination of both, the NEXUS resolver interface is the solution. In addition to the above functionality, the NX2A4E2 also has a brake input that provides stopping time and brake applied position to the network.

NXAE2 mini-NEXUS resolver interface

AMCI’s NXAE2 mini-NEXUS Resolver Interface brings resolver sensor data into any programmable logic controller (PLC)-based control system. These plug and play resolver interfaces are the trusted solution for bringing resolver data into your PLC when a plug-in module solution does not exist, such as with Rockwell Automation's 5380 ControlLogix. AMCI's NXAE2 connects a wide variety of Resolver sensors to your PLC using a standard network connection.

ANE2(X) AnyNET-I/O SSI Interface Networked I/O

AMCI’s AnyNET-I/O ANE2(X) SSI interface product is the easiest, most flexible way to bring SSI sensor data into any PLC-based control system. AMCI's ANE2(X) connects a wide variety of SSI sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software. The two channel ANE2(X) product is a direct interface to most Gray Code or Binary SSI sensors, including rotary encoders, linear sensors, barcode readers, and laser distance sensors. Additional ANE2(X) features include: Position preset, count direction, position scaling, and differential inputs that can be programmed as general purpose inputs, to apply the Preset Value, or to capture the scaled data value. AMCI's ANE2(X) expansion modules allow you to easily interface up to (12) SSI sensors using a single network connection, which reduces physical wiring and streamlines network traffic. No other product can rival the flexibility, performance, and value of AMCI's ANE2(X) SSI interface.

EtherCAT integrated stepper drive

AMCI's SD17060E-K Integrated Stepper Indexer / Driver for the EtherCAT network reduces stepper control system costs by eliminating the need for a separate stepper controller in your programmable logic controller (PLC). Plus, programming and configuration over the network is easy because it uses the PLC's native software (eg. Beckhoff TwinCAT).

SD31045E-K EtherCAT integrated stepper drive

AMCI's SD31045E-K Integrated Stepper Indexer / Driver for the EtherCAT network reduces stepper control system costs by eliminating the need for a separate stepper controller in your programmable logic controller (PLC). The indexer is built into the driver. Programming and configuration over the network is easy because it uses the PLC's native software (eg.

NR60E2 Ethernet absolute rotary shaft encoder

The AMCI NR60E2 series of heavy-duty Ethernet Encoders are compatible with all PLCs/PACs that support EtherNet/IP, Modbus-TCP or Profinet. The NR60E2 series Ethernet encoders are available in absolute single-turn and multi-turn packages using an IP67 rated 60mm diameter industrial housing. Flange and servo mounting styles are available to suit various mounting requirements.

SV160E2 ethernet integrated servo

AMCI's SV160E2 Integrated Servo is a 60mm sized 3-in-1 integrated servo motor, drive and controller package with network interface. It is a self-contained motion control product that is easy to install while delivering high performance at a competitive price. AMCI's SV160E2 Integrated Servo incorporates a servo motor, drive and controller into a single product that interfaces to your programmable logic controller (PLC) or programmable automation controller (PAC) over the network (EtherNet/IP, Modbus-TCP, and Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.

ANG1 (X) AnyNET -I/O integrated stepper motor controller and drive

AMCI’s ANG1(X) integrated stepper controller and drive product is a new approach to programmable logic controllers (PLC)-based motion control systems. Traditional motion controllers are difficult to integrate with PLC-based automation systems. There are so many manufacturers, many different choices and multiple proprietary features that complicate installation, programming and compatibility. There are also mechanical challenges because these motion controllers often use non-standard mounting hardware.

NXFE2 mini-nexus运动控制器

The NXFE2 mini-nexus motion controller is the first servo/stepper controller for the mini-NEXUS product line. The module offers one motion control axis that functions in either an open-loop configuration, or closed loop using the available encoder feedback. The motion axis can be used to drive a stepper or a servo with step or direction input capability. These plug and play motion controllers are the trusted solution for your programmable logic controller (PLC) when a plug-in module solution does not exist, such as with Rockwell Automation's CompactLogix 5380.

NR25 Networked absolute rotary shaft encoder

The AMCI NR25 series of heavy-duty networked encoders are compatible with all PLCs/PACs that support EtherNet/IP, Modbus-TCP, DeviceNet, or Profibus. The NR25 series networked encoders are available in absolute single-turn and multi-turn packages using an IP67 rated 2.5 inch size industrial housing. Solid shaft and hub shaft styles are available to suit various mounting requirements.

SD17060E2 ethernet integrated stepper drive

AMCI's SD17060E2 Networked Series Stepper Indexer, Driver for Ethernet/IP, Modbus-TCP or Profinet networks reduces stepper control system costs by eliminating the need for a separate stepper controller in your programmable logic controller (PLC). The indexer is built into the driver. Programming and configuration over the network is easy because it uses the PLC's native software.

NXEE2 mini-NEXUS SSI interface

产品是t AMCI的NXEE2 mini-NEXUS SSI接口he easiest, most flexible way to bring special structural inspection (SSI) sensor data into any programmable logic controller (PLC)-based control system. These plug and play SSI interfaces are the trusted solution for bringing SSI data into your PLC when a plug-in module solution does not exist, such as with Rockwell Automation's CompactLogix 5380. AMCI's NXEE2 connects a wide variety of SSI sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software. The two channel NXEE2 product is a direct interface to most gray code or binary SSI sensors, including rotary encoders, linear sensors, barcode readers and laser distance sensors.

ANA2(X) AnyNET-I/O resolver interface

AMCI’s AnyNET-I/O ANA2(X) Resolver interface product is the easiest, most flexible way to bring resolver sensor data into any programmable logic controlled (PLC)-based control system. AMCI's ANA2(X) connects a wide variety of resolver sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software. The ANA2(X) is the world's most versatile resolver interface. The programmable reference voltage, reference frequency and transformation ratio allows the two channel ANA2(X) to directly interface with a wide variety of transmit resolver sensors.

AnyNET-I/O Motion controllers for networked I/O

The ANF1(X) and ANF2(X) are the first servo/stepper controllers for the AnyNET-I/O product line. The modules offer one or two independent motion control axes that function in an open-loop configuration, or closed loop using the available encoder feedback. Each axis can be used to drive a stepper or a servo with step/direction input capability.

ANH2(X) AnyNET-I/O high speed counter networked I/O

The ANH2(X) is an expansion to the AnyNET-I/O product line from AMCI. The concept of this product line is simple: specialty and/or high speed I/O that can be attached to any popular industrial network; hence the name AnyNET-I/O. AnyNET-I/O is designed for a broad range of applications, from small machines with a single control enclosure, to large machines that use distributed I/O extensively to minimize wiring costs. What makes the AnyNET-I/O line different is that modules are available with or without a network interface. Eliminating the need for a separate networking module lowers the total cost of ownership for all applications, but especially for the cost sensitive small machines that only require one or two sophisticated functions. Like many modern controllers, AnyNET-I/O modules are designed to be DIN rail mounted.

ANS1E AnyNET for control networks

The ANS1E is a PLC-based design can interface with a host controller through various industrial networks including EtherNet/IP and Modbus TCP. The ANS1E is also the first AnyNET-I/O module to include an integral web server, which allows it to be programmed the ANS1E from any web browser. This allows you to run the ANS1 as an independent product, without the need of a host controller, making it an ideal, cost effective replacement for traditional standalone PLS units.

SMD34E2 Ethernet Integrated Stepper

AMCI SMD34E2网络化系列是一个大小3 - 341 Integrated Stepper Motor, Drive, and Controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD34E2 Networked Series incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP, and Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.

SMD17E2 Ethernet Integrated Stepper

AMCI's SMD17E2 Networked Series is a size 17 3-in-1 Integrated Stepper Motor, Drive, and Controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD17E2 Network Series incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP, & Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.

SD31045E2 Ethernet Integrated Stepper Drive

AMCI SD31045E2网络化系列步进索引器/ Driver for Ethernet/IP, Modbus-TCP, and Profinet networks reduces stepper control system costs by eliminating the need for a separate stepper controller in your PLC - we've built the indexer into the driver! Plus, programming and configuration over the network is easy because it uses the PLC's native software (eg. Studio 5000, TIA Portal, WindLDR, others). No extra software is required, and you don't need to learn another programming language.

SV400E2

AMCI's SV400E2 Integrated Servo is a 60mm sized 3-in-1 Integrated Servo Motor, Drive, and Controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SV400E2 Integrated Servo incorporates a Servo Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP, and Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.